Mail Center
Please Login to view messages

Flight AKA228-T

  • Submitted By: Norm Richards
  • Departure Airport: Eielson AFB (PAEI)
  • Arrival Airport: Fort Yukon (PFYU)
  • Aircraft: DHC6 CARGO-W (N100AC)
  • Flight Time: 00.24
  • Date Submitted: 05/27/2015
  • Status: Accepted
Flight Details
Gross Revenue:
(19 load / $ 99.00 per unit
$ 1, 881.00
Fuel Cost:
(479 fuel used @ 5.73 / unit)
$ 2, 744.67

Additional Log Information:

View Log

smartCARS version 2.1.0.20, 2015/5/26 UTC-4
[21:31:01] Preflight started, flying offline
[21:31:01] Flying Aerosoft DHC-6 Series 300 AKLAK AIR
[21:31:01] Engine 1 is on
[21:31:01] Engine 2 is on
[21:34:06] Pushing back with 2793 lb of fuel
[21:34:21] Taxiing to runway
[21:35:36] Taking off
[21:35:37] Rejected takeoff conditions met, returning to taxiing phase
[21:38:34] Sim paused
[21:38:34] Sim unpaused
[21:38:35] Sim paused
[21:38:36] Sim unpaused
[21:39:23] Flaps set to position 1
[21:39:41] Taking off
[21:39:53] Climbing, pitch: 5, roll: 2 degrees left, 106 kts
[21:39:59] Flaps set to position 0 at 209 ft at 112 kts
[21:43:49] Simulation rate set to 2X
[21:45:22] Cruising at 8000ft, pitch: 1, 157 kts
[22:00:58] Descending
[22:00:58] Approaching
[22:01:07] Overspeed entered
[22:01:17] Overspeed left after a max speed of 188 kts
[22:01:52] Final approach, 155 kts
[22:02:39] Go around conditions met
[22:02:41] Standard final approach conditions met
[22:03:04] Go around conditions met
[22:03:26] Standard final approach conditions met
[22:03:31] Go around conditions met
[22:03:31] Standard final approach conditions met
[22:03:36] Flaps set to position 4 at 724 ft at 120 kts
[22:03:40] Go around conditions met
[22:03:42] Standard final approach conditions met
[22:04:00] Touched down at -318 fpm, gear lever: down, pitch: 6, roll: 1 degrees left, 60 kts
[22:04:08] Landed in 1209 ft, fuel: 2315 lb, weight: 9504 lb
[22:04:08] Taxiing to gate
[22:04:18] The flight may now be ended
[22:04:18] Taxi time was less than 15 seconds
[22:04:18] Arrived, flight duration: 00:24
[22:04:19] Flaps set to position 0
[22:04:46] Simulation rate set to normal



NOTAM News

Facebook

Twitter